3 s construction

It consists of a soft iron core made of laminated sheets well insulated from each other. The coils P 1 P 2 and S 1 S 2 are wounded on the same core. The coil P 1 P 2 is a primary coil connected to AC source and S 1 S 2 is a secondary coil connect..

'S' is a large spherical conducting shell of radius few meters. C 1 and C 2 are the two supporting pillars. An insulating material like silk acts like a conveyor belt wound over two pulleys P 1 and P 2 . The pulleys move with the help of a motor. B 1 and B 2 are two spray combs. D i..

It consists of N turns of coil PQRS wound over a non-magnetic metallic frame usually rectangular or circular. The coil is suspended from a torsion head H by means of phosphor bronze strip in a magnetic pole by pieces N and S. A mirror M is attached to the phosphor bronze strip. The other..

To construct an angle equal to a given angle and a point Q on a line PQ. An angle equal to at Q. (i) With B as centre and any suitable radius draw an arc to cut AB at D and BC at E. (ii) With Q as centre and the same radius, draw an arc to cut PQ at S..

Construction - 3 - To construct angles of 60 o , 120 o and 30 o (i) Draw a line AB. (ii) With A as centre, taking any suitable radius, draw an arc which cuts AB at P. (iii) With P as centre and the same radius, cut the arc at Q. (iv) From Q, with the same radius, cut t..

Construction - 7 - To construct a perpendicular to a line from a point outside it A line AB and a point O outside it. It is required to construct a perpendicular to AB from O. (i) With O as centre, taking any suitable radius, draw an arc to cut AB at S and T...

Construction - 8 - To construct a perpendicular to a line at a point on it A line AB and a point O on it. A perpendicular to AB at O. (i) With O as centre and any suitable radius, draw arcs to cut AB at points S and T. (ii) Take radius equal to more than half the lengt..

Construction - 15 - To construct a triangle when the sum of two sides, the remaining side and the angle between them are given (We assume that the given angle can be constructed with ruler and compass alone) In BC = 3.8 cm, and AB + AC = 6.5 cm (1) Draw BC = ..

Construction - 14 - To construct a right angled D ABC when hypotenuse AC = 4 cm and hypotenuse and one acute angle are given (1) Draw a straight line AC = 4cm. (2) Taking OC as diameter, draw a semi circle on AC. (3) At A, construct meeting the semicircle at ..

Construction - 12 - To construct when , AC = 4 cm, BC = 4.8 cm, two sides and the angle opposite to one of them are given. (1) Draw a straight line AX (2) At A, Construct (3) From A, cut off AC = 4 cm. (4) From C, cut off CB = 4.8 cm, B lying on AX. (5) Then ..