7 d construction

It consists of two dees or D-shaped metal chambers D 1 and D 2 . The dees are separated by a small distance. The two dees are perpendicular to their plane. P is the position where the ion source is placed. The dees are maintained to a potential difference whose polar..

'S' is a large spherical conducting shell of radius few meters. C 1 and C 2 are the two supporting pillars. An insulating material like silk acts like a conveyor belt wound over two pulleys P 1 and P 2 . The pulleys move with the help of a motor. B 1 and B 2 are two spray combs. D i..

A simple D.C. generator consists of a rectangular coil ABCD which can be rotated rapidly between the poles N and S of a strong horse-shoe type magnet M. The generator coil is made of a large number of turns of insulated copper wire. The two ends of the coil are connected to the two copper..

To construct an angle equal to a given angle and a point Q on a line PQ. An angle equal to at Q. (i) With B as centre and any suitable radius draw an arc to cut AB at D and BC at E. (ii) With Q as centre and the same radius, draw an arc to cut PQ at ..

Constructing a perpendicular to a line from a point outside it..

To construct a perpendicular to a line from a point outside it A line AB and a point O outside it. It is required to construct a perpendicular to AB from O. (i) With O as centre, taking any suitable radius, draw an arc to cut AB at S and T. (ii) With S and T as centres and same ..

To construct a right angled D ABC when hypotenuse AC = 4 cm and hypotenuse and one acute angle are given (1) Draw a straight line AC = 4cm. (2) Taking OC as diameter, draw a semi circle on AC. (3) At A, construct meeting the semicircle at B. Join BC. (4) Then D..

To construct an isosceles when altitude CD to the base AB is 2 cm and the vertical angle C = 90 o (1) Take any straight line XY and at any point D on it, draw cutting off DC = 2 cm. Join DC. (2) At C, on either side of DC, construct angles DCA and DCB, respectively, ea..

To bisect an angle , we are required to bisect (i) With B as centre and any suitable radius draw an arc to cut AB at D and BC at E respectively. (ii) Take any radius greater than of ED, not necessarily the previous radius. (iii) With this radius, taking points D and E as centres..

To construct a triangle when the sum of two sides, the remaining side and the angle between them are given (We assume that the given angle can be constructed with ruler and compass alone) In BC = 3.8 cm, and AB + AC = 6.5 cm (1) Draw BC = 3.8 cm and at B make (2) With B as centr..