all 4 construction

Construction - 4 - To construct angles of 90 o , 45 o and 135 o (i) Draw a line AB and mark any point O on it. (ii) With O as centre, draw an arc of any suitable radius which cuts AB at P. (iii) With P as centre and the same radius, cut this arc at Q. (iv) From Q, with..

To construct angles of 90 o , 45 o and 135 o..

A box contains four types of pens: Type 1, Type 2, Type 3 and Type 4. Construct a bar graph to represent the number of pens in each type. What percent of the total number of pens belong to Type 2? Type 1 2 3 4 Number of pens 13 8 9 10 => Graph 4; 20..

To construct a right angled D ABC when hypotenuse AC = 4 cm and hypotenuse and one acute angle are given (1) Draw a straight line AC = 4cm. (2) Taking OC as diameter, draw a semi circle on AC. (3) At A, construct meeting the semicircle at B. Join BC. (4h..

To construct when , AC = 4 cm, BC = 4.8 cm, two sides and the angle opposite to one of them are given. (1) Draw a straight line AX (2) At A, Construct (3) From A, cut off AC = 4 cm. (4) From C, cut off CB = 4.8 cm, B lying on AX...

). At Y, make an angle of 30 o ( ). Produce their arms to meet at A. (3) Draw perpendicular bisectors of AX and AY to meet XY at B and C. (4) Join AB and AC. Then is the required triangl..

To construct an isosceles when altitude CD to the base AB is 2 cm and the vertical angle C = 90 o (1) Take any straight line XY and at any point D on it, draw cutting off DC = 2 cm. Join DC. (2) At C, on either side of DC, construct angles DCA and DCB, respectively, each being e..

Joe wants to construct a house in the area of 4,500 square feet. Find the area in square yards. => 450 square yards or 500 square yards or 600 square yards or 350 square yards..

Construction and Working of an Electrochemical Cell - A zinc rod is dipped in ZnSO 4 solution and a Cu rod in CuSO 4 solution. The Zn rod is externally connected to the copper rod through a rheostat, a galvanometer and a plug key. fig 5.10 The two aqueous solutions are..

A zinc rod is dipped in ZnSO 4 solution and a Cu rod in CuSO 4 solution. The Zn rod is externally connected to the copper rod through a rheostat, a galvanometer and a plug key. fig 5.10 The two aqueous solutions are interlinked through a salt bridge which is an inverted 'u' tube..