analog signal transmission

What is the Difference Between Digital and Analog Signals? - A computer performs its tasks by turning on and off a series of electronic switches represented by the numerical digits of 0 and 1. A 0 is the code for off, and a 1 is the code for on. Combinations of these digital cod..

Attenuation - is undesirable because it reduces signal strength at the receiver. More serious, however, is distortion interference, and noise, which appear as alternations of the signal shape. Although such contaminations may occur at any point, the standard convention is to bla..

A computer performs its tasks by turning on and off a series of electronic switches represented by the numerical digits of 0 and 1. A 0 is the code for off, and a 1 is the code for o..

These are commonly used in power distribution (at low frequencies) and in communications (at high frequencies). Biodiversity is most simply defined as the variety of life and its processes. A transmission line may be defined as a device for transmitting or guiding energy from one point t..

The amplitude-modulated band (AM band) contains the radio waves having frequency of less than 30 MHz or having wavelength of 10 m or more. The lower atmosphere is more or less transparent to radio waves. However, the ionosphere reflects back the radio waves. Thus, a signal emitted by an ..

In this type of modulation, E c , w c are kept constant. The phase angle q of the carrier wave is varied according to the modulating wave. The common name for "phase modulation" and "frequency modulation" is "angle modulation". The digital transmission of analog signa..

The disadvantages associate with digital communication systems include (i) Increased transmission (ii) Increased system complexity Although digital communication is becoming increasingly attractive for practical use, it is a fact that analog communication systems are still in e..

Symmetric Modem Configuration - The simplest approach to the design of modems is to treat the entire PSTN as a linear analog network. [Note that PSTN is almost entirely due to the use of pulse-code modulation (PCM) for the transmission of voice signals..

When a modem first makes a connection, you will hear screeching sounds coming from the modem. These are digital signals coming from the computer to which you are connecting being modulated into audible sounds. The modem sends a higher-pitched tone to represent the digit 1 and a lower-pitc..

The 'modem' is a contraction of the term modulator-demodulator. It is a conversion that facilitates the transmission and reception of the data over the public switched telephone network (PSTN). The data of interest may be digital signals generated by computers or service provide..