determinant access method

could be known and the height of the electric pole be determined. This method is called Triangulation method..

AB and CD are two mirrors fixed, as in the diagram, parallel to each other and facing each other, i.e., the reflection on CD is seen on AB. A small telescope and a vernier travelling over a scale, graduated in degrees, constitute the sextan..

Step 2: Determine L and M Step 4: Integral = Lx + M log (a cos x + bsi..

Methods to Determine Order of a Reaction - For determination of the order of a reaction, following methods are usually employed. a) Graphical Method b) Initial Rate Method c) Ostwald Method of Isolatio..

For determination of the order of a reaction, following methods are usually employed. a) Graphical Method b) Initial Rate Method c) Ostwald Method of Isolatio..

Graphical Method of Order Determination - First, the data of concentrations versus time is obtained by a suitable method. Then, the data is plotted as concentration versus time. From the resulting plot, the instantaneous rates are determined by drawing tangen..

is too small in the view of the large astronomical distance and the place of observation. Hence, in order to have a better and valid point of observation, two points on the surface of the Earth is taken as the basis for observation instead of the two eyes. In order to have simultaneous observatio..

For reactions where many reactants are involved, the order of the reaction is determined by the method of isolation. This was developed by Ostwald. In this method, the concentrations of all the reactants except one are taken in exces..

Isolation Method - For reactions where many reactants are involved, the order of the reaction is determined by the method of isolation. This was developed by Ostwald. In this method, the concentrations of all the reactants except one are taken in excess. For ..

The weight w 1 of the weight hanger H is noted. A load of, say w 2 = 1kg is added to the hanger. Now, the tension in the string will be T = (w 1 + w 2 ) g newtons, where g is the acceleration due to gravity. The given tuning fork is struck on a hard rubber pad and the shank of the fork is press..