what is advantage of amplitude modulation?

Amplitude Modulation - When the amplitude of high frequency carrier wave is changed in accordance with the intensity of the signal, it is called amplitude modulation. In amplitude modulation, only the amplitude of the c..

When the amplitude of high frequency carrier wave is changed in accordance with the intensity of the signal, it is called amplitude modulation..

In amplitude modulation, the sidebands contain the signal. The power in the sidebands is the only useful power. The power carrier by the side bands is only 33.3% even when there is 100% modulation. If modulation is 50%, then power carried by the sideban..

The modulating signal is sampled at the basic rate, usually where f m is the maximum value. The amplitude of the modulation determines the amplitude of the transmitted pulse. The band-width will be great for exact pulse waveform, but may be reduced by a l..

Modulation Factor - The ratio of change of amplitude of carrier wave to the amplitude of normal carrier wave is called the modulation factor ..

The ratio of change of amplitude of carrier wave to the amplitude of normal carrier wave is called the modulation factor ..

In amplitude modulation and frequency modulation, the modulation was done by sinusoidal signals. In pulse modulation, short pulses may do the modulation of a radio-frequency carrier. The simplest of these is the conventional telegraph, whe..

In frequency modulation, the frequency of the carrier wave is modified in accordance with the amplitude of the modulating wave. The amplitude of the carrier remains unchanged at all times. In other words, the amplitude of the modulated wav..

In amplitude modulation and frequency modulation, the modulation was done by sinusoidal signals. In pulse modulation, short pulses may do the modulation of a radio-frequency carrier. The simplest of these is the conventional telegrap..

Modulation - In earlier times, the most widely used form of communication was a system based on the transmission of a continuous-wave (CW) signal. With this system, the signal was interrupted periodically (Morse code) to produce a coded message. The CW systems required tremendous training..